al
no_unload_sensor
nus
Platesetter_3244
This disables the sensors on the cylinder which lifts the plate up the unload
from table from the drum, and then ejects it after the table is lowered (see
no_table_sensor and
nus = 0 enables checking of sensor.nus = 1 disables checking of sensor.
integer
0
0 to 1
When the sensors are disabled (nus=1) then the firmware defaults to delay of
(unload_delay) milliseconds before it assumes the cylinder moved as directed.
When enabled (nus=0) the same amount of time is allowed for the appropriate
sensor to be detected before a timeout error is generated.
cal